Non-combustible thermal and sound insulation boards made of mineral wool P75
Non-combustible thermal and sound insulation boards made of mineral wool P75
Non-combustible thermal and sound insulation boards made of mineral wool P75
Non-combustible thermal and sound insulation boards made of mineral wool P75
Non-combustible thermal and sound insulation boards made of mineral wool P75

Non-combustible thermal and sound insulation boards made of mineral wool P75

Material
Basalt
Density
from 25 to 75 kg/m³
Moisture content
no more than 0.3%
Thermal Conductivity
0.036 - 0.041 W/m·K
Compressibility
no more than 10%
Thickness
from 40 to 200 mm

Description

P75 mineral wool boards based on gabbro-diabase rock of the basalt group, with synthetic binder and water-repellent additive, are high-quality non-combustible thermal and sound insulation materials.

Application area:
Used as thermal and acoustic insulation in non-loaded structures of all types of buildings, including pitched roofs, vertical and inclined walls, attic spaces, attic floors, internal partitions, and floors of all types with load-bearing joists, where insulation is installed between the joists. Also used in ventilation and heating systems, and pipelines.

It is applied as a thermal insulation layer in three-layer (well-type) masonry, as well as the inner layer in double-layer insulation systems in ventilated façade constructions.

Storage conditions:
IZOTERM boards are packed in polyethylene or heat-shrink film. The boards must be stored in covered warehouses, separated by grades and sizes. Outdoor storage under a canopy is allowed, or on open площадках on pallets, in fully sealed polyethylene packaging that protects the boards from atmospheric exposure.

Exporter Information

KazTermoGroup LLP

Aktobe, Kazakhstan

2
tons of mineral wool thermal insulation materials
92
Thermal insulation materials made of mineral wool